Description
Description：
Bluetooth controller board controllers for the Gamecube. This new board allows for the use of up to 4 connected
Bluetooth controllers and can be a mix of any compatible Bluetooth controllers
​
Features:
Up to 4 Bluetooth controllers can be paired at once.
Easy installation, just replace the existing controller board.
Easy firmware update tool that only requires a Bluetooth enabled device like a computer(incompatible phone).
Configurable button mapping using a applications software on a computer.
GameCube wired controllers are still available after updating this Bluetooth mod.
Built in LED indicator, make connecting more clear.
Includes a CR1220 button battery holder on the board.
​
Supports the following Controllers:
- PS3 / PS4 / PS5 /
- Xbox One S / Xbox Series X|S
- Wii / Wii U Pro / Switch Pro/ Switch Joycon Wireless Controllers.
Reset Button Usage:
The reset button on the console has been converted to offer new functionality based on how long you hold the button down. While it
is being pressed the front ports will light up to show which state you will be enabling.
The reset button on the console has been converted to offer new functionality based on how long you hold the button down. While it
is being pressed the front ports will light up to show which state you will be enabling.
1.Holding for 0-3 seconds will perform the same action as on a stock console, reset.
In this state all four front port LEDs will be solid on.
In this state all four front port LEDs will be solid on.
2.Holding for 4-6 seconds will disconnect all connected Bluetooth controllers
In this state all four front port LEDs will be slowly blinking.
In this state all four front port LEDs will be slowly blinking.
3.Holding for 7-9 seconds will enable pairing mode
In this state all four front port LEDs will be blinking faster
In this state all four front port LEDs will be blinking faster
4.Holding for 10 seconds or more will factory reset to the original firmware and remove any custom configs
In this state all four front port LEDs will be blinking rapidly.
In this state all four front port LEDs will be blinking rapidly.
5.Hold reset button while powering on the wireless controller board will be in sleep mode and will not interfere with the console
use this in the event that a peripheral is not working nicely with wireless controller board.
​
use this in the event that a peripheral is not working nicely with wireless controller board.
​
![Modded GameCube Console [DOL-001] 64GB Picoboot with psu, hdmi clear transparent purple](https://digitalgamingheaven.co.uk/wp-content/uploads/2025/01/IMG_20240715_171826-EDIT-EDIT-324x243.jpg)
![Modded GameCube Console [DOL-001] 64GB Picoboot with psu, hdmi clear black](https://digitalgamingheaven.co.uk/wp-content/uploads/2025/01/IMG_20240715_171652-EDIT-324x243.jpg)
Reviews
There are no reviews yet.